Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

You will need an SSH client, Bitvise SSH Client is recommended. Click here and download and install.

Image RemovedImage Added

HostIP Address of eDCA
Port5522  –  Images v34 and greater
    22  –  All other Images
Usernameit
Initial methodpassword
Password

< Contact your Sales Rep, or Beet Support >

...

Port NameEthernet PortIP AddressCIDR SubnetDescription (ProposePurpose)
Up-Linkenp1s0DHCP
Used if required.
PLCenp0s31f610.0.0.2/24 (255.255.255.0)Default Port that should be used.

...

Adding Proxy Settings to eDCA Transfer

Reference "VI Commands Cheat Sheet", in Appendix below.

Note

eDCA Transfer version 2.6 and above ONLY.

  1. Change directory: cd /opt/beet/edca-transfer <enter>
  2. Type: sudo vi config.properties <enter>
  3. Edit the following lines for Proxy configuration.  Note you may need to remove "#"; these are commented line in configuration.

  4. Save and exit VI
    <esc> :wq! <enter>

Info
titleVerify Config Changes

Type: cat config.properties <enter>

*** This will print out the current configuration for "config.properties"

Change eDCA Service UID

Reference "VI Commands Cheat Sheet", in Appendix below.

  1. Change directory: cd /opt/beet/edca-transfer <enter>
  2. Type: sudo vi config.properties <enter>
  3. Change the line  edcaId=localhost.localdomain to appropriate UID as defined from EAS
  4. Save and exit VI
  5. <esc> :wq! <enter>

Service UID Example

Example:  edcaId=f352a35e-4e25-11e8-9c2d-fa7ae01bbebc

...